Concrete Screws / Screws - Super Savings! Save up to 37%


Super Savings! Up to 37% off on Concrete Screws (in Screws) at The Handyman Corner [184]. Top brands include Durafast, Red Head, Sammys, Simpson Strong-Tie, ITW RED HEAD, Hard-to-Find Fastener, MKT, CONFAST, Powers Fastening Innovations, Wej-It, & HILTI. Hurry! Limited time offers. Offers valid only while supplies last.



500 pc 1/4x2-3/4" HEX Concrete Screw
By Durafast
In Stock
$57.56

mpn: 11033, ean: 0615520110339,

4.5 out of 5 stars with 54 reviews
500 pc 1/4x2-3/4'' HEX Concrete ScrewDrives with a nut driver and a driver bit. #3 Phillips recess. high-low threads. Coating compatable with pressure treated lumber. 3/16'' drill bit included. #3 Phillips bit included.


1/4 x 2-1/4" Tapcon Storm Guard Anchors White Ultrashield (100)
By Red Head
In Stock
$67.00

ean: 0092097953109,

4.6 out of 5 stars with 54 reviews
Direct mount permanent anchors for quick and easy installations of metal and plywood panels to concrete and block. 3/16'' Hex Drive for installation (tool sold separately). Use with 3/16'' carbide-tipped drill bit. No caulking required.White UltraShield coating for corrosion protection in coastal environments. Threaded chamfered safety collar prevents overdriving. 1/4-20 x 7/8'' external thread above collar. 2-1/4'' concrete anchor length below the collar. Miami-Dade County - #06-0222.07 Approve


Sammys 8059957-25 Vertical Anchor Super Screw with 3/8 in. Threaded Rod Fitting, 5/16 x 1 3/4, for for Concrete, 25 Piece
By Sammys
In Stock
$52.99

mpn: 8059957-25, ean: 0804595136690,

4.9 out of 5 stars with 58 reviews
This Sammys 8059957-25 Rod Hanger provides a secure anchor for threaded rods with its 3/8 in. female fitting on the screw head. The coarse threads of this fastener grip solidly into the overhead or on the ground concrete base and secure a tight connection between the rod and the base. Ultra-sturdy, highly durable and easy to use, it is the ideal choice for hanging sprinklers, pipes, electrical fixtures and HVAC equipment to cast in place concrete, precast concrete and open web joist.FOR VERTICAL


500 pc 1/4x2-1/4" FLAT Concrete Screw
By Durafast
In Stock
$49.42

mpn: 11025, ean: 0615520110254,

4.3 out of 5 stars with 44 reviews
500 pc 1/4x2-1/4'' FLAT Concrete Screw#3 Phillips recess. high-low threads. Coating compatable with pressure treated lumber. 3/16'' drill bit included. #3 Phillips bit included.


Simpson Strong Tie THD37600H 3/8" x 6" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 50 per Box
By Simpson Strong-Tie
In Stock
$71.99

mpn: THD37600H, ean: 0707392402718,

4.2 out of 5 stars with 12 reviews
The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self undercutting, non-expansion characteristics of the Titen HD an


Simpson Strong Tie SD9212R500 Number-9 2-1/2-Inch SD Connector Structural Screw
By Simpson Strong-Tie
In Stock
$71.38
$62.99
You Save: 12%

mpn: SD9212R500, ean: 0707392103509,

4.2 out of 5 stars with 52 reviews
Simpson Strong Tie is continually striving to introduce innovative new products that advance construction technology. Being equally committed to fulfilling the Simpson Strong-Tie promise of uncompromised quality, service and support with each new expansion to our product offering. Simpson focuses on quality and product performance, documenting both with extensive testing done to the latest industry standards.Size: 2-1/2''. Mechanically Galvanized Coating. 9 x 2-1/2'' Sd Connector Screw. Brand: S


Simpson Strong Tie TTN25234HSS 1/4-Inch by 2-3/4-Inch Grade 410 Titen Concrete and Masonry Screw with 3/16-Inch Hex Head, Stainless Steel
By Simpson Strong-Tie
In Stock
$52.50

mpn: TTN25234HSS, ean: 0707392827818,

4.1 out of 5 stars with 28 reviews
Titen concrete and masonry screws are 3/16-inch and 1/4-inch diameter hardened screws for attaching all types of components to concrete and masonry. Available in hex and phillips head designs in standard blue, white and 410 stainless steel. Use with appropriately sized Titen drill bits included in each box. Bulk packages of 1,000 screws do not include a bit.H suffix for hex head. PF suffix for phillips head. B suffix bulk packages of 1,000 do not include a bit. Heat treated carbon steel.


THD62800H 5/8" x 8" Titen HD Heavy Duty Screw Anchors 10/pk
By Simpson Strong-Tie
In Stock
$52.40

mpn: THD62800H, ean: 0707392827306,

4.4 out of 5 stars with 47 reviews
5/8 x 8 Titen HD Concrete Anchor Zinc Plated (10) - The TITEN HD® anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. The high strength, easy to install TITEN HD® anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-underc


Red Head HW4-600 Tapcon Hex Washer Head 1/4-Inch by 6-Inch Anchor (100 per Box)
By ITW RED HEAD
In Stock
$51.91

mpn: HW4-600, ean: 0662520072815,

4.4 out of 5 stars with 59 reviews
From the manufacturer: Tapcon makes the ''original masonry'' anchor that cuts its own threads into concrete, brick, or block. Blue climaseal provides extended corrosion protection. Each boxes comes with 100 anchors and 1 carbide tipped tapcon drill bit. ITW tapcons are made in the USA. Specifications Fixture Thickness: 4-1/2'' - 5'' Recommended Tapcon Length: 6'' (152.4mm) Bit Length: 7-1/2'' (190.5mm)Cuts it's Own Threads into Concrete. Fast and Easy Installation - Three Anchors per Minut


Red Head SLDT-3830 Stainless Steel Large Diameter Tapcon 3/8-Inch by 3-Inch Anchor (50 per Box)
By ITW RED HEAD
In Stock
$125.15

mpn: SLDT-3830, ean: 0662520085822,

4.7 out of 5 stars with 18 reviews
Hex washer concrete anchor screws are built for attaching items to masonry or concrete. Tapered shanks provide wedging action for a strong, reliable hold. Stainless steel construction helps to prevent corrosion in demanding applications. ConcScrw, HexWashr, SS, 3/8''D, 3''L, PK50Cuts it's Own Threads into Concrete. Anchor Bodies are Made from Stainless Steel. Finished Hex Washer Head, with Anti-Rotation Serrations. Anchor is Stamped with a Length Identification Code. Use Standard Drill Bits.


Simpson Strong Tie THD50500H 1/2-Inch by 5-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
By Simpson Strong-Tie
In Stock
$40.19
$35.31
You Save: 12%

mpn: THD50500H, ean: 0707392708414,

4.5 out of 5 stars with 55 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head stamp


Hard-to-Find Fastener 014973185596 Stainless Hex Tapcon, 1/4 x 2-3/4-Inch, 50-Piece
By Hard-to-Find Fastener
In Stock
$48.26
$46.22
You Save: 4%

mpn: 014973185596, ean: 0738287507805,

4.6 out of 5 stars with 57 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get th


MKT Steel Conset Masonry Screw Anchor, Hex Washer Head Faced, 1/4" Diameter x 3-1/4" Length (Box of 100)
By MKT
In Stock
$23.31
$21.36
You Save: 8%

mpn: H4325, ean: 0789957279423,

4.8 out of 5 stars with 59 reviews
MKT Fastening steel conset masonry screw anchor. Commonly known as ''Tapcon''. Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads; hex head version offers 2 drive methods. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.Commonly known as ''Tapcon''. High stren


CONFAST 1/4" x 5" Flat Phillips Concrete Screw Anchor with Drill Bit (100 per Box)
By CONFAST
In Stock
$35.99

mpn: CSF145,

4.6 out of 5 stars with 22 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/16'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with


Red Head LDT-3454 Large Diameter Tapcon 3/4-Inch by 5-1/2-Inch Anchor (10 per Box)
By ITW RED HEAD
In Stock
$46.18
$29.02
You Save: 37%

mpn: LDT-3454, ean: 0610696433343,

4.7 out of 5 stars with 18 reviews
ITW Red Head Tapcon, Type: Tapcon, Style: Large diameter zinc plated, Size: 3/4'' x 5 1/2'', Package Quantity: 10 per boxCuts it's Own Threads into Concrete. Anchor Bodies are Made of Hardened Carbon Steel and Zinc Plated, Grade 19. Finished Hex Washer Head, with Anti-Rotation Serrations. Anchor is Stamped with a Length Identification Code. Use Standard Drill Bits.


500 pc 1/4x1-3/4" HEX Concrete Screw
By Durafast
In Stock
$44.85

mpn: 11031, ean: 0615520110315,

4.0 out of 5 stars with 24 reviews
500 pc 1/4x1-3/4'' HEX Concrete ScrewDrives with a nut driver and a driver bit. #3 Phillips recess. high-low threads. Coating compatable with pressure treated lumber. 3/16'' drill bit included. #2Phillips bit included.


Powers Fastening Innovations 04181 3/16-Inch by 1-3/4-Inch Tapper Hex Head Type 410 Stainless Steel Screw Anchor, 100 Per Box
By Powers Fastening Innovations
In Stock
$27.16

mpn: 04181, ean: 0075352041810,

4.1 out of 5 stars with 54 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Designed to meet the needs of most light to medium duty applications in concrete block and brick. Screw anchor is produced in either hex washer head or Philips flat


Simpson Strong Tie THD37300H 3/8-Inch by 3-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
By Simpson Strong-Tie
In Stock
$44.22
$34.95
You Save: 21%

mpn: THD37300H, ean: 0707392116813,

4.8 out of 5 stars with 59 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head stamp


1/4" x 1-3/4" Wej-It Hex Washer Head Wej-Con (Tapcon) Concrete Screw w/ Bit - 410 Stainless Steel - 100/BX
By Wej-It
In Stock
$48.25

mpn: HCSS1413, ean: 0795525769524,

4.2 out of 5 stars with 52 reviews
1/4'' x 1-3/4'' Wej-It slotted hex washer head Wej-Con (Tapcon) concrete screw w/ bit, silver r-blocker coating, 410 stainless steel, 100 pieces per box


Hilti 418081 5/8-Inch x 6 1/2-Inch Kwik Hus-EZ Concrete and Masonry Screw Anchor, 15-Pack
By HILTI
In Stock
$99.99

mpn: 418081, ean: 7613023596301,

4.1 out of 5 stars with 29 reviews
The Hilti Kwik HUS-EZ Screw Anchor is designed for use in base materials such as concrete (cracked, lightweight, lightweight over metal deck and uncracked) and grout-filled CMU masonry. This screw anchor passed the following test reports: COLA (City of Los Angeles), ICC-ES report (concrete), ICC-ES report (masonry), Nuclear (NQA-1) and Seismic. Also fits the following IBC compliances: IBC 2003, IBC 2006, IBC 2009 and IBC 2012.Highly productive solution for applications requiring an ICC approval



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - thehandymancorner.com. All Rights Reserved.