Expansion Shield Anchors / Anchors - Huge Savings! Save up to 17%


Huge Savings! Up to 17% off on Expansion Shield Anchors (in Anchors) at The Handyman Corner [235]. Top brands include Shorpioen, ALBANYCOUNTYFASTENERS, CLICK AND BUY, Hard-to-Find Fastener, RAW PRODUCTS CORP, Fischer, HILTI, Wej-It, CONFAST, Lexar Industrial, Powers Fasteners, & ASMC Industrial. Hurry! Limited time offers. Offers valid only while supplies last.



SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/16 BC-31AES (Box of 50)
By Shorpioen
In Stock
$42.48

mpn: BC-31AES,

4.4 out of 5 stars with 38 reviews
SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/16 BC-31AES (Box of 50)Please see the specifications in the spec sheet for full details (if spec sheet is not available, please email us and we will provide). If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forg


SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/8 BC-62AES (Box of 25)
By Shorpioen
In Stock
$77.71

mpn: BC-62AES,

4.6 out of 5 stars with 27 reviews
SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/8 BC-62AES (Box of 25)Please see the specifications in the spec sheet for full details (if spec sheet is not available, please email us and we will provide). If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forgi


Double Expansion Anchors for Masonry, Concrete, Brick or Block Zamac Zinc 1/2"-13 x 2-1/4" Qty 25
By ALBANYCOUNTYFASTENERS
In Stock
$152.63

mpn: 1044-004,

4.9 out of 5 stars with 30 reviews
This anchor consists of four parts-- a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit. The shields are connected by a pair of spring bands. At one end is the nut and at the other the cone, each designed so as to not turn during expansion. Used in soft masonry with machine screws or machine bolts which are exposed to vibration or side pressure. As the anchor sets, the opposite ends pull towards each other causing the elong


Best Design Bow Anchor Roller Stainless Steel Self Launching Heavy Duty Boat Marine, Anchor Stainless Steel - Anchor Roller, Stainless Steel Boat Anchors, Anchor Bow, Anchor Roller Wheel
By CLICK AND BUY
In Stock
$45.99

mpn: US3X0IMPGA8MZA8XZKKX, ean: 0707209308110,

4.0 out of 5 stars with 29 reviews
Length: 197mmQuantity: 1pcsSuitable for: boatPackage Contents:1x Marine hardware accessoriesOnly the above package content, other products are not included.EXCELLENT MATERIAL: Professional for bow anchor roller stainless steel self launching heavy duty boat marine, wear resistance, good storage, allows you to use for a long time. PRODUCT SPECIFICATIONS: Pad Material: 316 Stainless steel, Usage: Home DIY, Model Number: Rail Fitting with Rectangular Base, is_customized: Yes. CONVENIENT FOR USING:


Hard-to-Find Fastener 014973238100 Double Expansion Shields, 3/8, Piece-50
By Hard-to-Find Fastener
In Stock
$70.50
$61.68
You Save: 13%

mpn: ESAS-091-50, ean: 0014973238100,

4.3 out of 5 stars with 24 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light Zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get th


Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (250)
By RAW PRODUCTS CORP
In Stock
$154.55

mpn: 1044-002-0008,

4.7 out of 5 stars with 56 reviews
Double expansion shield anchors are best suited to anchor into materials of questionable strength such as soft or low quality materials. The anchor is designed to expand upon its entire length, maximizing friction and holding power even in low quality or suspect materials. These anchors can also be used in brick, block and stone as well. The zinc plating offers a layer of corrosion resistance to plain alloy steel.1/4'' zinc plated double expansion shield anchors consist of two expansion cones an


Fischer - Duopower Cube 6 x 30 + Free Flexometer (750 Units), 546161
By Fischer
In Stock
$64.81

ean: 4048962327298,

4.6 out of 5 stars with 13 reviews
Fischer duopower 6x30 cube cube cube cube with gift flexometer; for DIY enthusiasts, reform and repair comes its new format; the duo can be used on all solid, hollow surfaces and even cardboard-plaster; providing loads of up to 95 kg per anchor point.Duopower 6x30 cube size 750 pieces with gift flexometer. Princess applications, depending on its diameter: shelves, lamps, thermals, paintings and passes, among others.. Fischer duopower 6x30 with 2k technology (perfect fusion of nylon with polyprop


Hard-to-Find Fastener 014973269661 Lag Expansion Shields, 5/8 Long, Piece-25
By Hard-to-Find Fastener
In Stock
$59.97
$59.84

mpn: ESAS-118-25, ean: 0738287041897,

4.0 out of 5 stars with 40 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get th


Hilti KWIK Bolt TZ Expansion Anchor - 316 Stainless Steel - KB-TZ 5/8" x 4-3/4" - 411737- Box of 15
By HILTI
In Stock
$295.00

mpn: 411737,

4.3 out of 5 stars with 26 reviews
Meets Ductility Requirements of ACI318 D.3.3 Product and Length Identification Mark Facilitates Quality Control and Inspection Hole Diameter: 5/8 in Anchor Length: 4-3/4 in Thread Length: 1-1/2 in Embed Depth (Nominal): 3-5/8 in Allowable Static Loads (Greater Than/Equal To 4000 psi Concrete): Tension (lb): 3893 Shear (lb): 5290 For Base Materials: Lightweight Concrete, Cracked and Uncracked Concrete, Light to Medium Weight Concrete over Metal Deck Anchor Material: AISI 316 Stainless Steel Box Q


Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8" Length, 1/4"-20 Threads (Pack Of 100)
By Wej-It
In Stock
$44.99

mpn: MS14, ean: 0798167823715,

4.5 out of 5 stars with 16 reviews
The Wej-It MS14 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. It can be used to anchor within uneven holes and soft materials, and its antimonial lead sleeve and zamac alloy cone resist rust for extended use.Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands


CONFAST 3/8" Lag Shield Anchor Short (50 per Box)
By CONFAST
In Stock
$29.98

mpn: LSS38,

4.3 out of 5 stars with 32 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1-3/4''. Therefore, the anchor


CONFAST 5/16" Lag Shield Anchor Long (100 per Box)
By CONFAST
In Stock
$30.99

mpn: LSL516,

4.3 out of 5 stars with 35 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1-3/4''. Therefore, the anchor


(50) Drop-in 1/2 x 2 Concrete Expansion Anchor 5/8 Drill Zinc Plated 1/2-13
By Lexar Industrial
In Stock
$29.99

mpn: 362020081254,

4.5 out of 5 stars with 55 reviews
Lot of (50) drop-in style expansion anchors. These zinc plated anchors are 1/2-13 thread and are 2'' in length requiring a 5/8'' diameter drill.Diameter: 1/2-13. Length: 2. Drive Type:. Head Type:. Finish: Zinc.


Hilti KWIK Bolt 3 Expansion Anchor - Carbon Steel - KB3 3/4" x 5-1/2 " - 282536- Box of 10
By HILTI
In Stock
$97.24

mpn: 282536, ean: 0785497124254,

4.4 out of 5 stars with 16 reviews
Hole Diameter: 3/4 in Anchor Length: 5-1/2 in Thread Length: 3-1/4in Allowable Loads (Greater Than/Equal To 4000 psi Concrete): Embed Depth: 4-3/4'' Tension (lb): 5285 Shear (lb): 5495 For Base Materials: Lightweight Concrete, Uncracked Concrete, Lightweight Concrete over Metal Deck, Grout-filled Block Anchor Material: Carbon Steel, Electroplated Zinc (min 5 microns) Box Quantity: 10 Hilti Part Number: 282536 Listings and Approvals: ICC-ES (International Code Council) - ESR-1385 (AC01 Masonry),


CONFAST 3/8" (Inside/Screw 3/8" Diameter) Double Expansion Anchor (50 per Box)
By CONFAST
In Stock
$59.99

mpn: DE38,

4.3 out of 5 stars with 15 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2''. Therefore, the anchor mu


CONFAST 1/4" Lag Shield Anchor Short (100 per Box)
By CONFAST
In Stock
$25.09

mpn: LSS14,

4.2 out of 5 stars with 49 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1''. Therefore, the anchor must


3/4" x 6-1/4", Powers Power-Stud+ SD1 Strength Design Wedge Expansion Anchors, Carbon Steel Zinc Plated, 20/Bx
By Powers Fasteners
In Stock
$44.59

mpn: 7444SD1,

4.0 out of 5 stars with 53 reviews
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and un-cracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included.ICC-ES ESR 2818 - Category 1, Cracked and Uncracked Concrete. ICC-ES ESR 2966 - Concrete Mason


1/4" x 1" Lag Screw Expansion Shield Short Zinc Alloy Pk 25
By ASMC Industrial
In Stock
$20.63

mpn: 0000-112992,

4.0 out of 5 stars with 27 reviews
PRODUCT SPECIFICATIONSPart #: 0000-112992Fastener Type: Lag Screw Expansion Shield ShortSize Description: 1/4'' x 1''Diameter/Nominal Size: 1/4''Length: 1''System of Measurement: InchMaterial: Zinc AlloyFinish: Plain Finish (No Plating)Average Piece Weight: 0.0253000 lbs.Anchors are used for anchoring and securing objects into drywall, concrete or brick. Comes in many types including sleeve, drop in, wedge, and others.Please see the specifications in the table below for full details. If you have


3/8" x 7", Powers Power-Stud+ SD1 Strength Design Wedge Expansion Anchors, Carbon Steel Zinc Plated, 50/Bx
By Powers Fasteners
In Stock
$45.50
$37.74
You Save: 17%

mpn: 7417SD1,

4.0 out of 5 stars with 13 reviews
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and un-cracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included.ICC-ES ESR 2818 - Category 1, Cracked and Uncracked Concrete. ICC-ES ESR 2966 - Concrete Mason


Wej-It MS56 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 1" Length, 5/16"-18 Threads (Pack Of 50)
By Wej-It
In Stock
$21.01
$19.99
You Save: 5%

mpn: MS56,

4.1 out of 5 stars with 35 reviews
The Wej-It MS56 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. It can be used to anchor within uneven holes and soft materials, and its antimonial lead sleeve and zamac alloy cone resist rust for extended use.Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - thehandymancorner.com. All Rights Reserved.