Wedge Anchors / Anchors - Huge Savings! Save up to 13%


Huge Savings! Up to 13% off on Wedge Anchors (in Anchors) at The Handyman Corner [241]. Top brands include CONFAST, Powers Fastening Innovations, Simpson Strong-Tie, & ITW Ramset Red Head. Hurry! Limited time offers. Offers valid only while supplies last.



CONFAST 3/8" x 6-1/2" Galvanized Wedge Anchor (Box of 50)
By CONFAST
In Stock
$82.99

mpn: WAG38612,

4.9 out of 5 stars with 7 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter o


CONFAST 1/2" x 12" Stainless Steel Wedge Anchor (25 per Box)
By CONFAST
In Stock
$215.99

mpn: WAS1212,

4.6 out of 5 stars with 52 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2''.Le


CONFAST 1/2" x 5-1/2" Stainless Steel Wedge Anchor (25 per Box)
By CONFAST
In Stock
$110.99

mpn: WAS12512,

4.3 out of 5 stars with 24 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2''.Le


CONFAST 1/2" x 12" Wedge Anchor Zinc Plated (Box of 25)
By CONFAST
In Stock
$59.99

mpn: WA1212,

4.8 out of 5 stars with 43 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


Powers Fastening Innovations 7242SD 1/2-Inch by 2-1/2-Inch Wedge-Bolt and Blue Tip Large Diameter Screw Anchor Carbon Steel, 50 Per Box
By Powers Fastening Innovations
In Stock
$56.21

mpn: 7242SD, ean: 0075352771946,

4.2 out of 5 stars with 29 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Heavy duty screw anchor with a finished hex head. Designed for consistent and reliable performance in cracked and untracked concrete. Powers Fastening Innovations.


Simpson Strong-Tie Wedge Tie 18 Ga
By Simpson Strong-Tie
In Stock
$132.44

mpn: WT8, ean: 0044315925405,

4.9 out of 5 stars with 17 reviews
Simpson Strong-Tie Galvanized Steel Wedge Form Tie - Designed for low foundation wall applications. 5/8'' wide formed V design for rigidity allows accurate form spacing and support. Use (2) 3-1/2'' long wedges for each tie. Used with 2x solid sawn lumber. Not recommended for wall pours greater than 4' high. 18-gauge galvanized steel. - Material: Galvanized, Gauge: 18 ga., Pkg Qty: 1United States.


CONFAST 5/8" x 12" Galvanized Wedge Anchor (Box of 10)
By CONFAST
In Stock
$79.29

mpn: WAG5812,

4.0 out of 5 stars with 52 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


CONFAST 1/2" x 3-3/4" Stainless Steel Wedge Anchor (25 per Box)
By CONFAST
In Stock
$69.99

mpn: WAS12334,

4.0 out of 5 stars with 38 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2''.Le


CONFAST 3/8" x 5" Stainless Steel Wedge Anchor (50 per Box)
By CONFAST
In Stock
$108.39

mpn: WAS385,

4.4 out of 5 stars with 48 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 3/8''.Le


CONFAST 5/16" x 3-1/2" Stainless Steel Wedge Anchor (100 per Box)
By CONFAST
In Stock
$154.99

mpn: WAS516312,

4.0 out of 5 stars with 18 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 5/16'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 5/16''.


CONFAST 1/2" x 10" Wedge Anchor Zinc Plated (Box of 25)
By CONFAST
In Stock
$49.19

mpn: WA1210,

4.9 out of 5 stars with 55 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


CONFAST 5/8" x 8-1/2" Wedge Anchor Zinc Plated (Box of 20)
By CONFAST
In Stock
$40.99

mpn: WA58812,

4.8 out of 5 stars with 41 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


CONFAST 3/8" x 2-1/4" Stainless Steel Wedge Anchor (10 per Box)
By CONFAST
In Stock
$26.99

mpn: WAS38214-I10,

4.9 out of 5 stars with 35 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 3/8''.Le


CONFAST 3/4" x 12" Wedge Anchor Zinc Plated (Box of 10)
By CONFAST
In Stock
$59.99

mpn: WA3412,

4.0 out of 5 stars with 50 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


CONFAST 1/4" x 1-3/4" 316 Stainless Steel Wedge Anchor (10 per Box)
By CONFAST
In Stock
$23.99

mpn: WAS-31614134-I10,

4.5 out of 5 stars with 11 reviews
ApplicationsThe anchor is made from 316 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Submerged/Chemicals environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the an


Red Head WS-1242 Trubolt Carbon Steel Wedge 1/2-Inch by 4-1/4-Inch Anchor (25 per Box)
By ITW Ramset Red Head
In Stock
$34.07

mpn: IRHWS1242, ean: 0662520019452,

4.2 out of 5 stars with 53 reviews
ITW Red Head Wedge Anchor, Type: Wedge Anchor, Style: Carbon, Size: 1/2'' x 4 1/4'', Package Quantity: 25 per boxSize: 1/2 inch, length: 4-1/4 inch, quantity: 25. Durable. Easy to set. Use to connect wood frame to concrete.


Simpson Strong Tie Wa75812 3/4-Inch by 8-1/2-Inch with 6-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 10-Piece
By Simpson Strong-Tie
In Stock
$30.25
$26.34
You Save: 13%

mpn: WA75812, ean: 0044315313516,

4.2 out of 5 stars with 21 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


CONFAST 1/2" x 4-1/4" Stainless Steel Wedge Anchor (25 per Box)
By CONFAST
In Stock
$64.99

mpn: WAS12414,

4.5 out of 5 stars with 29 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2''.Le


CONFAST 5/8" x 10" Wedge Anchor Zinc Plated (Box of 10)
By CONFAST
In Stock
$32.99

mpn: WA5810,

4.3 out of 5 stars with 51 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


CONFAST 1/4" x 3-1/4" Wedge Anchor Zinc Plated (Box of 100)
By CONFAST
In Stock
$28.39

mpn: WA14314,

4.8 out of 5 stars with 52 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - thehandymancorner.com. All Rights Reserved.