Bumpers / Spacers & Standoffs Save up to 1%


Up to 1% off on Bumpers (in Spacers & Standoffs) at The Handyman Corner [267]. Top brands include Small Parts, dangoodbuy, Herco, Hecht Rubber, Generic, & New Millennium Entertainment, LLC. Hurry! Limited time offers. Offers valid only while supplies last.



Recessed Bumper with Steel Washer Inserts, 1" OD x 9/16" Height, Style 1
By Small Parts
In Stock
$64.20

mpn: MR2000079,

4.1 out of 5 stars with 60 reviews
WRS recessed bumper with steel washer inserts. 0.25-inches recess depth. 0.53125-inches recess diameter. 0.3125-inches bore depth. 0.28125-inches bore diameter. Measures 1-inches OD by 0.5625-inches height.Recessed bumper with steel washer inserts. 1/4-inches recess depth. 17/32-inches recess diameter. 5/16-inches bore depth. 9/32-inches bore diameter.


Small Rubber Push-in Mushroom Bumper Fits 3/16" Opening - 11/32" Diameter (1000)
By dangoodbuy
In Stock
$123.00

mpn: PB1132, ean: 0709750953023,

4.4 out of 5 stars with 22 reviews
Small Hard Rubber Push-In Bumper - ''Rubber Feet'' ---- ''Mushroom Bumper'' ------ Good for adding a foot or bumper to a confined space. ---- Pad surface is convex or rounded ----- Bumper Diameter 11/32'' ----- Height of Bumper 5/32'' ----- Stem Fits Hole Diameter 3/16'' ( Can drill slightly smaller hole for tight grip ) ----- Stem Length 3/16'' ---- Hard SBR Rubber Push-in Bumper ----- Durometer Hardness is 70A ---- Temperature range of -30° to +180° F. ---- Material is nonmarking. ---- Screw


Recessed Bumper with Steel Washer Inserts, 1/2" OD x 1/4" Height, Style 1
By Small Parts
In Stock
$85.20

mpn: MR2000285,

4.0 out of 5 stars with 54 reviews
WRS recessed bumper with steel washer inserts. 0.15625-inches recess depth. 0.25-inches recess diameter. 0.09375-inches bore depth. 0.09375-inches bore diameter. Measures 0.5-inches OD by 0.25-inches height.Recessed bumper with steel washer inserts. 5/32-inches recess depth. 1/4-inches recess diameter. 3/32-inches bore depth. 3/32-inches bore diameter.


Herco TB-20 Solid Molded Rubber Trailer Bumper (6 x 3-1/2 x 3-1/2 in)
By Herco
In Stock
$29.50

mpn: MPTX-B2-BK,

4.9 out of 5 stars with 11 reviews
Solid Rubber Trailer Bumpers from Hecht Rubber Corporation. Molded rubber dock bumpers resist weather and abrasion to help protect docks, trailers, dock levelers and shelters.Impact absorbing solid rubber for maximum protection. Built tough to stand up to weather, UV and ozone. Meets all OSHA and OEM requirements. Drilled mounting holes for attaching to walls and equipment. Measurements: LxWxH: 6'' x 3-1/2'' x 3-1/2'' A: 1-1/2'' B: 1-3/4'' C: 3-3/8'' D: 1/2'' (See Diagram).


Recessed Bumper with Steel Washer Inserts, 5/8" OD x 9/32" Height, Style 1
By Small Parts
In Stock
$24.85
$24.48
You Save: 1%

mpn: MR2000411,

4.1 out of 5 stars with 49 reviews
WRS recessed bumper with steel washer inserts. 0.15625-inches recess depth. 0.25-inches recess diameter. 0.125-inches bore depth. 0.125-inches bore diameter. Measures 0.625-inches OD by 0.28125-inches height.Recessed bumper with steel washer inserts. 5/32-inches recess depth. 1/4-inches recess diameter. 1/8-inches bore depth. 1/8-inches bore diameter.


Recessed Bumper with Steel Washer Inserts, 1-1/4" OD x 1-1/4" Height, Style 1
By Small Parts
In Stock
$109.20

mpn: MR2000398,

4.2 out of 5 stars with 20 reviews
WRS recessed bumper with steel washer inserts. 0.75-inches recess depth. 0.375-inches recess diameter. 0.5-inches bore depth. 0.25-inches bore diameter. Measures 1.25-inches OD by 1.25-inches height.Recessed bumper with steel washer inserts. 3/4-inches recess depth. 3/8-inches recess diameter. 1/2-inches bore depth. 1/4-inches bore diameter.


Herco D-2 Extruded Rubber Bumper (2 Ft - Undrilled)
By Hecht Rubber
In Stock
$29.00

mpn: MPNX-D2-02,

4.1 out of 5 stars with 44 reviews
Herco D-Shaped EPDM rubber bumper series features a collapsible bulb design for maximum cushioning and impact absorption. Vertical or horizontal uses. Ideal for fastening to carts and equipment edges.Extruded EPDM rubber to RMA tolerances. Durometer (ASTM D-412) 70 +/- 5. Impact Resistance (ASTM 2632) 75%. Length 2'-0'' (See drawing for dimensions). Standard bumper is supplied undrilled.


Herco 1213125 Round Double Stud Black Rubber Vibration Mount (2-1/4" x 3-1/8")
By Herco
In Stock
$59.50

mpn: MPVB-44-BK,

4.5 out of 5 stars with 36 reviews
Typical applications are for noise control, and protection from forces generated in compression. They may also be utilized as a leveling foot, or as a bumper.Extra Large and sturdy for vibration isolation. Rubber Dia (''A'') = 1'', Height (''B'') = 1''. Two 1-1/2'' long 1/2'' - 13 integral steel mounting bolts (''C'', ''D''). Medium (50 Durometer) Rubber for effective isolation. Provides dynamic isolation for a broad frequency range.


Herco 8" Rubber Equipment/Cart Corner Bumper (Brown)
By Herco
In Stock
$23.50

mpn: MPEB-08-BR,

4.6 out of 5 stars with 18 reviews
The 8'' bumper is made from flexible vinyl to provide durable corner protection for carts, cabinetry, and countertops. Available in brown or black.Dimensions: 1'' D X 1'' H X 8'' W. Molded flexible vinyl protects equipment and personnel. Ozone and chemical resistant for harsh environments. Integral mounting holes for easy installation. Durable construction for home or commercial use.


Herco 121378 Round Double Stud Black Rubber Vibration Mount (1-1/4" x 2-1/2")
By Herco
In Stock
$38.50

mpn: MPVB-39-BK,

4.7 out of 5 stars with 36 reviews
Typical applications are for noise control, and protection from forces generated in compression. They may also be utilized as a leveling foot, or as a bumper.Extra Large and sturdy for vibration isolation. Rubber Dia (''A'') = 2-1/2'', Height (''B'') = 1-1/4''. Two 1'' long 1/2'' - 13 integral steel mounting bolts (''C'', ''D''). Medium (50 Durometer) Rubber for effective isolation. Provides dynamic isolation for a broad frequency range.


3/4" Diameter Recessed Rubber Bumper with Steel Washer - Foot Rubber Feet 1" High (4) (48)
By dangoodbuy
In Stock
$46.00

mpn: CRW341, ean: 0709750954969,

4.8 out of 5 stars with 26 reviews
Tall Rubber Bumper - With Steel Washer - Rounded Top SBR Rubber Diameter 3/4'' Height 1'' Screw Hole Diameter 5/32'' ( Accepts smaller than #8 screw ) Height from bottom of bumper to top of screw head seat 3/4'' Counterbore Diameter - upper portion of hole ( for screw Head ) 3/8'' Hard SBR Rubber Bumper without embedded washer Durometer Hardness is 65A - 80A Temperature range of 0° to +180° F. Material is nonmarking. Screws not included. Black SBR RubberDurable. Steel Washer Addes for Strength


Push-in Rubber Bumper Tight-Grip Stem Fits 1/4" Hole 1/2" Diameter 1/4" Height for Use in 1/16" Panel Thickness (250)
By Generic
In Stock
$48.00

mpn: PM14, ean: 0709750953221,

4.1 out of 5 stars with 54 reviews
Bumper Diameter 1/2'' --- Height of Bumper 1/4'' --- Stem Fits Hole Diameter 1/4'' --- Ridge Diameter 5/16'' --- Optimum panel thickness 1/16'' ---- Hard abrasion resistant SBR Rubber --- Durometer Hardness is 55A to 65A --- Temperature range of -25° to +180° F.Durable. Installs Easily.


Round Rubber Pull-Through Bumper 7/8" Diameter for 1/8" Hole in 1/8" Thick Material (100)
By dangoodbuy
In Stock
$66.00

mpn: PB7818, ean: 0709750953078,

4.9 out of 5 stars with 14 reviews
Hard Rubber Ridged Stem Bumper - ''Rubber Feet'' ----- Pull-Through Mount - Pull Tab On Stem allows bumper to be pulled into position easily --- Ridge on stem provides a secure fit --- Installs easily --- Bumper Diameter 7/8'' --- Height of Bumper 11/64'' ---- Pull Through Stem Fits Hole Diameter 1/8'' ---- Stem Diameter 7/32'' ( Hole Size for Panel ) See Additional Pictures --- Ridge Diameter 11/32'' --- Optimum panel thickness 1/8'' --- Medium Hard abrasion resistant SBR Rubber ---- Durometer


Rubber Push-in Ridged Stem Bumper 9/16" Diameter fits 1/4" Hole in 1/8" Thick Material (500)
By Generic
In Stock
$92.50

mpn: PBR91614, ean: 0709750953160,

4.7 out of 5 stars with 18 reviews
Hard Rubber Push-In Bumper - ''Rubber Feet'' ---- Flat Pad Surface --- Bumper Diameter 9/16'' --- Height of bumper 1/8'' --- Fits Hole Size 1/4'' ---- Stem Length ( Panel Thickness ) 1/8'' ---- Hard SBR Rubber Push-in Bumper --- Durometer Hardness is 70A ---- Temperature range of -30° to +180° F. --- Material is nonmarking. ---- Black Rubber ---- We ship to USA OnlyDurable. Installs Easily.


Yellow Vinyl Caps 3/16" Inside Diameter x 1/2" Height - Durable Flexible Vinyl Protects The Ends of 3/16" Rods and Shafts (500)
By dangoodbuy
In Stock
$42.00

mpn: PCY31612, ean: 0709750953931,

4.4 out of 5 stars with 43 reviews
3/16'' Inside Diameter Yellow Push-On Pliable Vinyl Caps ----- Strong and pliable, these vinyl caps will protect ends of shafts and rods. ------. ------ Durometer hardness is 75A. Maximum temperature is 140° F for 10 minutes. -----Approximately 1/2'' inside Height ------Gloss Vinyl surface textureStrong. Durable. Waterproof. Flexible.


Orange Vinyl Caps - 3/8" Inside Diameter x 1/2" Inside Height - Durable Protective Caps - Fits Ends of 3/8" Rods or Shafts (500)
By dangoodbuy
In Stock
$52.00

mpn: PCO3812, ean: 0709750954761,

4.9 out of 5 stars with 58 reviews
3/8'' Inside Diameter Orange Push-On Pliable Vinyl Caps ----- High Visibility Orange ----- Strong and pliable, these vinyl caps will protect ends of 3/8'' shafts and rods. ------ Durometer hardness is 75A. Maximum temperature is 140° F for 10 minutes. -----1/2'' inside Height ------Gloss Vinyl surface texture - Fits BNC Connectors - Can Protect Rods and Shafts 3/8'' DiameterStrong. High Visibility. Durable.


Herco D-6 Extruded Rubber Bumper (5 Ft - Drilled)
By Herco
In Stock
$319.00

mpn: MPEX-D6-BK,

4.5 out of 5 stars with 58 reviews
Herco D-Shaped EPDM rubber bumper series features a collapsible bulb design for maximum cushioning and impact absorption. Vertical or horizontal uses. Ideal for fastening to carts and equipment edges.Extruded EPDM rubber to RMA tolerances. Durometer (ASTM D-412) 70 +/- 5. Impact Resistance (ASTM 2632) 75%. Length 5'-0'' (See drawing for dimensions). Bumper is pre-drilled for mounting hardware.


Herco D-2 Extruded Rubber Bumper (5 Ft - Undrilled)
By Hecht Rubber
In Stock
$79.00

mpn: MPNX-D2-05,

4.6 out of 5 stars with 14 reviews
Herco D-Shaped EPDM rubber bumper series features a collapsible bulb design for maximum cushioning and impact absorption. Vertical or horizontal uses. Ideal for fastening to carts and equipment edges.Extruded EPDM rubber to RMA tolerances. Durometer (ASTM D-412) 70 +/- 5. Impact Resistance (ASTM 2632) 75%. Length 5'-0'' (See drawing for dimensions). Standard bumper is supplied undrilled.


Hard Rubber Bumpers Feet 3/4" Inch Diameter 13/32" High SBR Rubber - (250)
By New Millennium Entertainment, LLC
In Stock
$53.00

mpn: CF34, ean: 0709750956161,

4.2 out of 5 stars with 58 reviews
Diameter 3/4'' Height --- 13/32'' Screw Hole Diameter 5/32'' --- Height from bottom of bumper to top of screw head seat 5/32'' --- Diameter of upper portion of hole ( for screw Head ) 5/16'' ---Hard SBR Rubber Bumper without washer --- Durometer Hardness is 70A --- Temperature range of -30° to +180° F. --- Screws not included. --- Black RubberDurable. High Quality SBR Rubber.


Herco D-3 Extruded Rubber Bumper (10 Ft - Drilled)
By Hecht Rubber
In Stock
$168.00

mpn: MPEX-D3-BK,

4.7 out of 5 stars with 18 reviews
Herco D-Shaped EPDM rubber bumper series features a collapsible bulb design for maximum cushioning and impact absorption. Vertical or horizontal uses. Ideal for fastening to carts and equipment edges.Extruded EPDM rubber to RMA tolerances. Durometer (ASTM D-412) 70 +/- 5. Impact Resistance (ASTM 2632) 75%. Length 10'-0'' (See drawing for dimensions). Pre-drilled for 1/2'' mounting hardware (12'' spacing). Hardware not included..



Viewing Page 1 of 2