CONFAST 5/8'' x 4-3/4'' Strike Anchor (25 per Box)


CONFAST 5/8'' x 4-3/4'' Strike Anchor (25 per Box) by CONFAST at The Handyman Corner. MPN: SA58434. Hurry! Limited time offer. Offer valid only while supplies last. ApplicationsThe anchor is made from Carbon Steel, and is Yellow Zinc. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


CONFAST 5/8'' x 4-3/4'' Strike Anchor (25 per Box) by CONFAST
4.3 out of 5 stars with 44 reviews
Condition: New
Availability: In Stock
$90.99


Quantity:  

 


Product Description & Reviews

ApplicationsThe anchor is made from Carbon Steel, and is Yellow Zinc. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 5/8".Length Anchor The length of the anchor is 4-3/4"Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/2". Therefore, the anchor must be installed so that a minimum of 2-1/2" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-5/8". This will ensure that the minimum embedment of 2-1/2" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 5/8" diameter anchor requires the hole in the fixture to be 3/4".Spacing between AnchorsEach anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.

Features & Highlights

  • POSITIVE DRIVE-Use a hammer to drive the nail to expand the anchor
  • YELLOW ZINC PLATING-Helps prevent rusting in dry environments
  • CAN SET EMBEDMENT DEPTH-Affords uniformity and consistent look after the anchors are set
  • FOR CONCRETE ONLY-Provides consistent holding values
  • NUTS AND WASHERS INCLUDED-Ready to install; simple and fast

Additional Information

Brand:
CONFAST
Manufacturer:
CONFAST
Category:
Drive Anchors
MPN:
SA58434
Part Number:
SA58434
Publisher:
CONFAST
Package Weight:
14.4 pounds
Package Size:
5.5 x 3.5 x 9.5 inches

 


Have questions about this item (SA58434), or would like to inquire about a custom or bulk order?


If you have any questions about this product by CONFAST, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: BC-1024ANR,
SHORPIOEN Round Head Nail In Anchor Nylon 3/16 x 1 1/2 BC-1024ANR (Box of 100)Please see the specifications in the spec sheet for full details (if spec sheet is not available, please email us and we will provide). If you have any questions or doubts,...

mpn: 793244379383,
Zinc plated steel Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks.Drive the pin into the anchor body, expanding the anchor, to form a tight fit. Using a predrilled hole, they are installed ...

mpn: 014973284343, ean: 0014973284343,
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and st...

mpn: 375665, ean: 0008236109467,
Used for anchoring into concrete only. Anchor is inserted into hole, nail is struck and expands the anchor locking it in place. Removable with a claw hammer if necessary.Used for anchoring into concrete only. Anchor is inserted into hole, nail is str...